德国SWING滑翔伞 ENB伞头 NYOS 进阶伞头

  • 德国SWING滑翔伞 ENB伞头 NYOS 进阶伞头
  • 所属分类:
    发货地:德宏
  • 价    格:25080
  • 市场价格:
  • 今日价格: 有特价请联系
  • 优惠详情: 剩余数量总共数量
  • 最近热度:
  • 累计热度: 146
  • 综合得分:
  • 信誉得分:
  • 品牌:SWING
  • 货号:5be9aaaab88a
  • 立刻联系购买联系商家flyingheart等风的胖子

        本商品由flyingheart等风的胖子提供,通过flyingheart等风的胖子完成交易,请放心购物

  • 品牌:SWING
  • 产地:德国
  • 吊牌价:22800

When pilots achieve personal best performances, the main reason is of course the pilot does the right thing on the right day. It is equally important that the pilot and the gear used are in perfect harmony, so that the pilot is able to focus fully on the task at hand.

When SWING developed the NEXUS, it devised a completely new overall concept, which gives top priority to stability, manageability and comfort during flight. During the 2015 cross-country season, our team pilots demonstrated by their outstanding performances what is possible with this kind of wing, which allows the pilot total concentration.

The NEXUS has been developed further to create the NYOS for EN-B pilots. It is a performance-oriented wing, which perfects the new feeling in flight: comfort, stability and manageability, combined with lively handling and superior climbing in thermals.

Let the NYOS take you to a whole new series of personal bests!

 Flying characteristics and performance 

Pilots have practically the same feeling when flying the NYOS as they do with its "big brother", the NEXUS. The performance data is nearly identical as well. At the same time, the NYOS is more subdued and easy to control in rough conditions.

Turn behaviour

Its turn behaviour is very precise, with the bank angle able to be altered without any difficulty. The NYOS has no tendency to sink and nor does it drop out of the turning radius in turbulences. The extremely stable wing tips require little additional pilot input and allow narrow or flat centering techniques without any problem.

Overall our team describes the balances between damping, stability and turn behaviour as ideal.

 

Technologies used:


 
 

triple 3D-shaping for perfect control over profile and tension
 

3D-shaping in the top surface for targeted tension control is now standard practice in paraglider design. However, corresponding 3D-shaping in the bottom surface is needed to achieve the best possible result, because the tension from one surface affects the other.

For the first time with the NYOS the ballooning at the trailing edge is reduced by a combination of 3D-shaping and mini ribs. For increasing glide performance up to now the last 20% of chord of wing has been flattened using mini ribs only. But the system of a lot of ribs give the perfect chance for an additional 3D-shaping. This triple 3D-shaping on the NYOS gives a noticeable gain of stability and performance and an aerodynamically perfect trailing edge.


 
 

Adaptive profile with optimised risers for flying at speed (B preloading: profile re-shaping for greater stability)
The speed bar attached at the B-level preloads it when activated and after that the A-level follows. This creates a profile which is particularly stable and better suited for flying at speed, especially when partially accelerated. The effect is comparable with that of a shark-nose profile, but without the uneven edge on the bottom surface which reduces performance.

 


 

C-BRIDGE for perfect pitch control and greater performance
Performance-oriented flying means flying fast.This is especially the case in competitions. The need to fly as fast as possible in competition has given rise to a special flying technique on 2-liner-competition wings: using the rearmost main lines (B- or C-level), instead of the brakes, to stabilize the canopy while using the speed bar. NEXUS as well as NYOS feature this special type for steering: the C-BRIDGE. It connects the tops of the split C-risers with a bar and allows the pilot to react to imminent problems by briefly pulling down both C-risers. But the C-BRIDGE can do much more. By carefully activating the C-BRIDGE accented at the outside it allows steering without any disruptive compromises in performance or centering week thermals most effectively.

 

Mini-ribs with internal seams for improved handling both on the ground and during flight 

For the first time the mini ribs at the trailing edge of the NYOS have been closed inside the canopy. So we have no longer external seams and so there aren't any threads which could get caught on the ground and be pulled out during launch. 
 

High quality lightweight construction through appropriate choice of materials and manufacturing
For this reason, we use low-stretch unsheathed and sheathed Technora lines in a mix for the RACE line set of NYOS. All together all lines of the NYOS measure hardly one finger wide.
the unsheathed lines have a short protecting covering at the lines shackles
additonally we reinforce the cut edges of the fabrics used at the V-tapes and load-bearing tapes. The ends of the nylon rods in the nose are also reinforced and nevertheless replaceable easily.
the risers are equipped with high-quality HARKEN rolls for an easy and smoothly operating of the speed bar. The gathering system at the brake lines is made by high-grade steel rings and garantuees the prezise handling of NYOS
Material with a stronger coating is used for the areas where aging as a result UV exposure is particularly relevant (top surface, leading edge).
all these things make the NYOS extemely durable and at the same time surprisingly light-weight.

Scope of delivery

Swing NYOS
Sherpa Backpack
Protection Bag
Compression Strap
Manual

 

colors

 

 

热门相关信息